I figured it's time to change the transmission fluid so I bought two gallons of Swepco 201 not realizing it only takes about 3 quarts. It's 50 bucks a gallon so oops. Anyway, I raised the left side of the car and removed the fill plug and drain plugs. The old fluid looked in good shape. Some dust particle sized shavings in it but thats ok. We then replaced the drain plug and then with the car raised, used a hand pump for gas to pump the fluid from the container to the tranny. Once it was 'full' then we slowly lowered the car and the excess fluid came out of the fill plug. Then raise it again and replace the fill plug. Pretty easy operation with the hand pump.
